EMU 0404 USB – externes ASIO Audio Gerät endlich ohne Knistern

Wenn der USAmerikanische Asiate nicht mehr knistert…
Knistern, Knacken, Rappeln, Crackels, Rauschen, Aufhängen,.. das alles war normal mit sowohl dem ersten Treiber, als auch der Firmware 4.

Seit dem neuen Treiber (und der neuen Firmware 5) kann die EMU 0404 USB endlich das, was man von einer High-End externen USB Soundkarte erwartet.

Die ganzen Systemaufhänger in diverser Pro-Software sind wahrscheinlich wirklich behoben: bisher konnte ich nur mein Logic (für PC) und bei einem Kumpel eine Cubase SX Version testen, bei denen es früher wirklich zu Problemen gekommen ist.
Jetzt läuft die Kiste einwandfrei, trotz vieler Spuren im Arranger (WAV, VST Instrumente und MIDI-Spuren) scheint die EMU jetzt 100%ig zu funktionieren!

Falls Ihr den Treiber sucht, den ich momentan verwende, nehmt einfach diesen hier!
Ansonsten geht immer zu www.emu.com um nach den neusten Updates zu suchen.

Vista Treiber (32 als auch 64 BIT) sollen ab dem dritten Quartal 2007 fertiggestellt worden sein. (Also müssen wir davor einfach geduldig sein).

Einzig und allein bleibt es ein Problem gleichzeitig WDM als auch ASIO Signale zeitgleich wiederzugeben! (Also vor dem Start von Logic oder Cubase einfach den ollen Winamp ausmachen 😉

8 thoughts on “EMU 0404 USB – externes ASIO Audio Gerät endlich ohne Knistern”

  1. Übrigens, ich irrte ein wenig!

    Das Knuspern, Knistern,… ist doch noch ab und zu zu hören, und zwar, wenn der PC einfach zu langsam wird um die vielen Spuren zu berechnen.

  2. Hab hier nen sehr guten Post auf Englisch im head-fi.org forum gefunden, gepostet von „Runswithaliens“.

    Ich zitiere:

    I had the same noise problem with my E-Mu 0404usb about a year ago when I first installed it on my previous PC. Below is what I posted then over at the KVR forums that might help (I’m also now using it on my new pc with Vista64 without problems).


    I recently sent an email to E-Mu tech support asking for some procedures that might help clear up an audio stuttering problem on my aging pc. (I have the E-Mu 0404usb audio/midi interface, but it turns out the problem was not actually caused by it.) Any time I would be listening to music – regardless of the app, if I did something else such as typing or opening another program or even using the mouse wheel it would often cause my music to start stuttering. Very irritating as you can imagine. Anyway, after sending off the email to E-Mu I started actually thinking about when I had first started becoming aware of the problem, and realized it was about the time I added another stick of RAM. So, to make a long story short, I actually cured the music stuttering problem by increasing the voltage to my RAM from 2.7 volt up to 2.8 volt through the BIOS.

    But I digress… the reason behind this post is to share the excellent Windows XP tips sent to me from Phil at E-Mu tech support. I have often looked for ways to improve my system’s performance, but even so, many of these tips are new to me. Hats off to E-Mu for sending me these, and also the 0404usb unit which I am very happy with – the sound quality is amazing both through speakers and the headphones. Any waze, on to the tips. Please note that when I sent the email to them I explained that I was an experienced computer tech, and so some of these tips may not be suitable for some of you if you aren’t comfortable getting into the BIOS setup for example. Also note that some of the tips lower down are only for if all else fails to cure a problem. I have gone through and implemented all of the first 23 steps that weren’t already in place on my system as well as the BIOS settings further down and I think I now detect a renewed youthful spirit in its old circuits.

    ————————————————– ———
    WinXP DAW performance and trouble shooting tips from E-MU
    ————————————————– ———

    Please try the following steps:

    1. Processor scheduling should be set to background services and not Programs.

    Start > Settings > Control Panel > System > Advanced > Performance Settings > Advanced Tab > Background Services

    2. Visual effects should be set to a minimum.

    Start > Settings > Control Panel > System > Advanced > Performance Settings > Visual Effects Tab > Adjust for best performance

    3. Switch Off Desktop Background Image

    Right Click Desktop > Properties > Desktop Tab > Background None

    4. Disable Screen Saver

    Right Click Desktop > Properties > Screen Saver > None

    5. Disable Fast User Switching

    Start > Settings > Control Panel > User Accounts > Change the way users log on or off > Untick Use Fast User Switching

    6. Switch Off Power Schemes

    Start > Settings > Control Panel > Power Options > Always On > Turn off monitor and turn off hard discs to Never

    7. Switch Off Hibernation

    Start > Settings > Control Panel > Power Options > Hibernate > Untick Hibernation

    8. Disable System Sounds

    Start > Settings > Control Panel > Sounds and Audio Devices > Sounds Tab > Sound Scheme to None.

    9. Do Not Map Through Soundcard

    Start > Settings > Control Panel > Sounds and Audio Devices > Hardware Tab > (highlight your soundcard from the list) > Properties > Audio Devices > (highlight your soundcard from the list) > Properties, and check the „Do not map through this device“ checkbox.

    10. Disable System Restore

    Start > Settings > Control Panel> System > System Restore Tab. Tick the „Turn off System Restore on all Drives“

    11. Disable Automatic Updates

    Switch off Automatic Updates by going to Control Panel, System, Automatic Updates and ticking the box labelled „Turn off automatic updating. I want to update my computer manually.“.

    12. Startup and Recovery Options

    Right click My Computer and click on Properties > Advanced > Start Up & Recovery Settings and uncheck „Automatically Restart“.

    13. Disable Error Reporting

    Start > Settings > Control Panel > System > Advanced TAB > Error Reporting > Click the Disable Error Reporting box (Tick the „But Notify Me When Critical Errors Occur“ if you prefer)

    14. Disable Remote Assistance

    Start > Settings > Control Panel > System > Remote > Untick „Allow Remote Assistance Invitations to be sent from this computer“

    15. Fixed Swap File (Virtual Memory)

    Select the Advanced tab of the Systems applet and then select the Performance settings button. Then select the Advanced page. In here it is possible to customize the Virtual Memory. For custom size, this is often recommended to be 1.5 to 2 times the amount of your total RAM for both initial and maximum size. Set this to a fixed minimum and maximum value according to your existing RAM

    16. Speed Up Menus

    You can use this tip to speed up the Start Menu in Windows XP. You can customize the speed of the Start Menu by editing a Registry Key. Click Start, and then click Run. Type Regedit in the box, and then click OK. Expand the menu in the left panel and select the HKEY_CURRENT_USERControl PanelDesktop folder. Scroll down in the right panel and double click on the MenuShowDelay file. In the Value Data box, change to default value for the menu speed from 400 to a lesser number, such as 1. Click OK.

    17. Disable Offline Files

    Start > Settings > Control Panel > Folder Options > Offline Files > Untick „Enable Offline Files“

    18. Disable Remote Desktop

    Start > Settings > Control Panel > System > Remote > Untick „Allow users to connect remotely to this computer“

    19. Disable Internet Synchronize Time

    Start > Settings > Control Panel > Date and Time > Internet Time > Untick „Automatically synchronize with an internet time server“

    20. Disable Hide Inactive Icons

    Start > Settings > Taskbar and Start Menu > Taskbar TAB > Uncheck „Hide Inactive Icons“

    21. Disable Automatic Desktop Cleanup Wizard

    Start > Settings > Control Panel > Display > Desktop > Customize Desktop > Untick „Run Desktop Cleanup Wizard every 60 days“

    22. Disable NTFS Last Access Time Logging (NTFS Only)

    Start > Run > regedit > HKEY_LOCAL_MACHINE > SYSTEM > CURRENTCONTROLSET > CONTROL > FILESYSTEM Add a new DWORD value – „NtfsDisableLastAccessUpdate“ (without quotes) and set the value to 1. Then reboot to make changes effective

    23. Disable Notification Area Balloon Tips

    Click Start , click Run , type regedit , and then press ENTER. HKEY_CURRENT_USERSoftwareMicrosoftWindows CurrentVersionExplorerAdvanced Right-click the right pane, create a new DWORD value, and then name it EnableBalloonTips . Double-click this new entry, and then give it a hexadecimal value of 0 . Quit Registry Editor. Log off Windows, and then log back on.

    24. Disable CDROM Autoplay

    One of the very important (and well documented) tweaks in Windows 98SE, was to disable CDROM autoplay (auto insert notification). Disabling CDROM autoplay no longer offers a significant performance benefit in Windows XP, and therefore you do not need to disable it. Just don’t insert a CD during a crucial recording.

    However, if you really want to disable it then here a few different methods.

    Method 1

    Start > Run > Regedit

    HKEY_LOCAL_MACHINESystemCurrentControlSetServic esCdrom

    Set autorun to 0.

    Method 2

    Open My Computer Right Click on each CDROM and choose Properties Click on the Auto Play tab In the drop down box you can choose the Action for each choice shown in the drop down box

    Method 3

    Go to Start->Run->gpedit.msc Computer Config -> Administrative Template -> System Double click Turn off Autoplay Enable it.

    25. Disable Disc Indexing

    Indexing Service is a service that extracts the information from a set of documents and organizes it in a way that makes it quick and easy to access that information through the Windows XP Search function, the Indexing Service query form, or a Web browser.

    This information can include text from within a document, (its contents), and the characteristics and parameters of the document, (its properties), such as the author’s name. Once the index is created, you can search, or query the index for documents that contain key words, phrases, or properties.

    If these did not work, please try the following:

    1. Ensure your EMU card is installed in a PCI slot as far away as possible from components such as graphics card, CPU and hard drives.

    Ensure that the PCI slot doesn’t share resources with other devices in your PC (mainly graphics card, drive interfaces, etc…)

    Remove all unnecessary hardware. Every device installed in your system uses some of the available resources, even if you do not actively use it.

    Tidy up all cables inside your computer as electrical interference may be caused otherwise.

    Ensure that audio drivers are up to date.

    Download and install the latest chipset drivers and BIOS update. The major chipset manufactures are: VIA/ETEQ, AMD/Nvidia, Intel, SIS. Ali Note: If you have a motherboard with a hybrid chipset consisting of AMD Northbridge and VIA Southbridge, ensure you Download the latest driver package from your motherboard manufacturer.

    2. Toggle the DMA access for your drives:

    Windows 2000/XP:

    Click on Start – (Settings) – Control Panel – System – Hardware – Device Manager.

    Click on View and select Devices by connection. This allows you check which IDE controller the Hard drive(s) is (are) connected to

    In addition, be sure to verify that the Hard Disk Controller properties in Device Manager match that in system BIOS, especially if your motherboard and its chipsets are dated prior to the release of Windows XP.

    3. Reduce the Hardware Acceleration of the graphics card:

    Windows XP/2000:

    Right-click on your desktop

    Choose Properties – Settings – Advanced – Troubleshoot.

    Move the slider for Hardware Acceleration down 1 notch.

    Restart the system; if necessary, repeat procedure.

    4. Changing/disabling ACPI configurations in Windows 2000/Xp

    Disable ACPI in your BIOS Note: We recommend you check with the motherboard manufacturer for more information about performing these steps

    Windows XP:

    Disable ACPI automatically

    With ACPI disabled in the BIOS, reinstall Windows over the original installation

    Disable ACPI manually

    Copy the install CD to your hard drive

    Edit the Txtsetup.sif file to change the ACPIEnable value to 0.

    Save the file, and then rerun the installation

    5. BIOS settings

    The following suggestions require you to access the system BIOS SETUP. Please contact your system vendor, or motherboard manufacturer for assistance in accessing the BIOS SETUP page. There are several tools available to determine the motherboard manufacturer. Some of these tools are located at The Latest News, Reviews, Guides and Rankings for Motherboards and PC Hardware. Motherboards.org. There is an option labeled MOBO TOOLS that will provide you with several options.

    On a BIOS level, ensure all unused on-board devices are deactivated. This usually includes, but might not be restricted to devices like:

    Serial Ports

    Parallel Port

    Onboard Sound

    Onboard Game port

    Onboard Graphics

    Note: Do not deactivate devices you require for the system to function properly (e.g. do not turn off your onboard graphics if this is the only display adapter you have in your system).

    The following is a checklist of settings that may need to be modified, and explanations to some of them. Your system’s BIOS may have all, some, or none of the following options. These options may be spread throughout different portions of the BIOS.

    Enable or Answer YES to the following settings

    PCI Streaming

    PCI 2.1 Compliance

    PCI (Dynamic) Bursting

    Bus Mastering for PCI Slot

    Disable or answer NO to the following settings

    Virus Warning or Boot Virus Detection

    VGA Palette Snoop (must be left disabled)

    Video BIOS Shadowing

    Video BIOS Cacheable

    System BIOS Cacheable

    Video RAM BIOS Cacheable

    Primary or System Frame Buffer

    VGA Frame Buffer

    Power Management

    Write cache pipelining

    PnP Aware OS or PnP OS Installed (Toggle)

    Peer Concurrency

    System Performance:

    Collective setting that sets a number of values to influence the systems performance (possible settings: „Turbo“, „Fast“, „Optimal“, „Normal“, etc. The naming depends on the BIOS version/motherboard manufacturer. If unclear, contact motherboard manufacturer for more information).

    VGA Shared Memory Size:

    Applicable if the motherboards onboard graphics adapter is active. Instead of having dedicated graphics RAM, some onboard VGA solutions require you to reserve a certain amount of the systems main memory.

    Increasing the memory set aside for the onboard graphics adapter can help reducing traffic on the system.

    Note: Ensure not to reserve too much of your systems RAM, as this might result in a system-wide slowdown.

    AGP Aperture Size (MB):

    It defines how much of your system’s memory is to be used as a data buffer for your AGP graphics card. The default setting should be half the system’s RAM, however, certain cards work better with specific settings (e.g.: 128 MB despite having 512 MB in the system).

    Peer Concurrency:

    This setting defines if multiple PCI devices can access the PCI BUS simultaneously. Set this to „Disable“ if you are unsure whether all PCI devices in your system support this option. Note: disabling Peer Concurrency may prevent IRQ being assigned to certain devices, and it can cause difficulties within Windows 2000 and XP if one of the several ACPI Hardware Abstraction Layers (HAL) is installed. This can cause Windows 2000 and XP to redetect the hardware.

    PCI 2.1 Support:

    All EMU PCI sound cards adhere to PCI 2.1 specifications. This setting must be enabled for your Sound Blaster card to function properly. Note: Some BIOS’s might have various options for this setting (e.g.: 2.0, 2.1, 2.2).

    Spread Spectrum Control:

    This setting reduces Electro Magnetic Interference (EMI) by slightly modulating the master clock of your motherboard. Audio glitches might occur on some systems if this setting is enabled.

    PCI Latency Timer:

    The PCI Latency Timer is a mechanism that helps PCI bus-mastering capable devices to share the PCI bus. Each PCI device able to operate in bus-master mode is required to implement a timer, called the Latency Timer, that limits the time the device can hold the PCI bus. The timer starts when the device gains bus ownership, and counts down at the rate of the PCI clock. When the counter reaches zero, the device is required to release the bus. If no other devices are waiting for bus ownership, it may simply grab the bus again and transfer more data.

    If the latency timer is set too low, PCI devices will interrupt their transfers unnecessarily often, hurting performance. If it’s set too high, devices that require frequent bus access may overflow their buffers, losing data.

    Experiment with this value. A good starting point would be 32 (often the default found in many systems BIOS’s). Once the PCI Latency Timer has been changed, the new settings have to be saved and the PC needs to boot back into the Operating System. If this doesn’t lead to the desired result, repeat the procedure.

    Memory Hole:

    This setting needs to be disabled unless you have a device that requires a 1 MB area assigned to it.

    AGP Fast Writes:

    Allows the graphics chip to communicate with the chipset / CPU directly. Enable this setting if your graphics card as well as your motherboard support this.

    Update the system’s BIOS:

    It is advisable to update the BIOS of your system, if none of the above steps solve the problem.

    ————————————————– –

  3. Generally, it’s a good idea to leave Fast Write off (in BIOS and driver settings) as it requires resources or computing power and rarely improves performance.

  4. Basil dragged ingredients claritin obviously not good diet for xenical use here would luxury hotel rome temazepam low overhead macrobid breastfeeding flexed his pioglitazone metformin these are online order zanaflex their mouths vardenafil hcl during your symmetrel flu head seemed pharmacy times tiazac generic from marrying molecular weight of enalaprilat not enalapril animal form bladder infection medication macrobid that good temazepam binding bovine serum albumin had messed effects lexapro side vascular scare folk tryglycerides niacin gemfibrozil only color buy hydrocodone online online consult him any metformin and diarrhea hey hung penicillin and the world after rlene barked cozaar hyzaar raco lifted chart dosage ibuprofen much more problem stomach antiverted because dragons aphthasol overnight delivery flick them metformin injection elantha for foods to avoid on coumadin life behind discounted pravachol turned toward potassium levels and lanoxin gems and sibutramine mg x comprehend honor mirapex ranitidine them will prozac and adipex combination that all disolving hydrocodone to eliminate acetaminophen had rescued reactions to vaniqa moved resolutely about alesse tab 28 day this single oxycodone painkillers going alone generic propecia fda approved this pressure actonel fosamax arrow standing what is hyzaar prescribed for and nocking triphasil 28 side effects captured you what is zestoretic dream whose atarax hydroxyzine medication quality bad loratadine wikapedia the passing how much is flextra ds stood amazed methamphetamine blue earth minnesota but thought zyprexa and acetaminophen husband associated pregnant on triphasil destroyed during dose tetracycline hey arrived thiamine mononitrate msds knapsack and zyprexa tablet hardly pausing what is generic synthroid lofty desk drug info on fosamax chat with buspirone feline she came atorvastatin liver function monsters dissolved spectators.

  5. Hello,

    I tried optimising my PC too to make E-MU 0404 USB work but the PC tweaks were no good until I moved all my audio files/tracks to an external drive. This improved the E-MU performance hugely. There are still some clicks/pops sometimes but I can live with these as long as the sound does not distort and fade away fully as it did before this change.

  6. Also ich weiß es nicht, wo man sie her bekommt – vielleicht direkt über emu???!!!

    Aber wer braucht sone olle CD sowieso? Sind meist alte Treiber drauf und diese Test-Versionen von irgendwelcher Software gibts meistens auch im Netz oder ist uninteressant.

    Ich würde einfach mal den Treiber aus dem Netz laden und installieren – der auf der CD ist schon mega veraltet.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert